Universal Rod End Kits Builders Kit 7/8-14 x 3/4 RH and LH Chrome Moly Housing, Nylon Race Fits 1.750 x 0.120 Tubing 24 Rod Ends
Kit Includes...
Spherical Rod End Bearings, Right Hand: (12) twelve 7/8-14 RH x 3/4" bore MXM-14-12 chrome moly male spherical rod ends. 4130 Heat Treated Chrome Moly Housing, chrome plated, slotted nylon race.
Spherical Rod End Bearings, Left Hand: (12) twelve 7/8-14 LH x 3/4" bore MXML-14-12 chrome moly male spherical rod ends. 4130 Heat Treated Chrome Moly Housing, chrome plated, slotted nylon race.
Thread Bungs, Right Hand: (12) twelve RH chrome moly bungs to fit 1.750" OD x 0.120" W Tubing.
Thread Bungs, Left Hand: (12) twelve LH chrome moly bungs to fit 1.750" OD x 0.120" W Tubing.
High Misalignment Inserts: (48) HMBZC-12-10 zinc plated steel inserts. 5/8" bore size. Each insert adds 0.509" to width of assembly, or 1.018" overall (two per rod end).
Spacers/Washers: (48) MCW-12 zinc plated steel spacers. 3/4" bore. 0.300" thick.
Rubber Seals: (48) neoprene face seals bonded to a stainless steel washer. Use two per spherical rod end bearing.
Rubber Boots: There are no rubber boots in this kit.
Nuts & Bolts...
(12) 7/8-14 RH Grade 2 plated jam nuts (for rod end stem)
(12) 7/8-14 LH Grade 2 plated jam nuts (for rod end stem)
(24) 5/8-18 RH x 3.50" Grade 5 plated bolts (for use with misalignment inserts)
(24) 5/8-18 RH Grade 5 plated lock nuts (for use with misalignment insert bolts)
(24) 3/4-16 RH x 3.50" Grade 5 plated bolts (for use with rod ends without inserts)
(24) 3/4-16 RH Grade 5 plated lock nuts (for use with rod end bolts)
Accessories: Steinjager also manufactures complete tubular suspension links from DOM and/or chrome moly tubing. Contact us about your special application or private labeling opportunity.
Welding: For the best safety results, make sure any welding is done by a certified welder, and that the mating components are of the same or comparable material.
