Universal Rod End Kits Builders Kit 3/4-16 x 5/8 RH and LH Chrome Moly Housing, Nylon Race Fits 1.250 x 0.095 Tubing 20 Rod Ends
Kit Includes...
Spherical Rod End Bearings, Right Hand: (10) ten 3/4-16 RH x 5/8" bore MXM-12-10 chrome moly male spherical rod ends. 4130 Heat Treated Chrome Moly Housing, chrome plated, slotted nylon race.
Spherical Rod End Bearings, Left Hand: (10) ten 3/4-16 LH x 5/8" bore MXML-12-10 chrome moly male spherical rod ends. 4130 Heat Treated Chrome Moly Housing, chrome plated, slotted nylon race.
Thread Bungs, Right Hand: (10) ten RH chrome moly bungs to fit 1.250" OD x 0.095" W Tubing.
Thread Bungs, Left Hand: (10) ten LH chrome moly bungs to fit 1.250" OD x 0.095" W Tubing.
High Misalignment Inserts: (40) HMBZC-10-8 zinc plated steel inserts. 1/2" bore size. Each insert adds 0.485" to width of assembly, or 0.970" overall (two per rod end).
Spacers/Washers: (40) MCW-10 zinc plated steel spacers. 5/8" bore. 0.270" thick.
Rubber Seals: (40) neoprene face seals bonded to a stainless steel washer. Use two per spherical rod end bearing.
Rubber Boots: (20) neoprene boots for spherical rod ends fitted with high misalignment inserts.
Nuts & Bolts...
(10) 3/4-16 RH Grade 2 plated jam nuts (for rod end stem)
(10) 3/4-16 LH Grade 2 plated jam nuts (for rod end stem)
(20) 5/8-18 RH x 2.50" Grade 5 plated bolts (for use with misalignment inserts)
(20) 5/8-18 RH Grade 5 plated lock nuts (for use with misalignment insert bolts)
(20) 1/2-20 RH x 3.00" Grade 5 plated bolts (for use with rod ends without inserts)
(20) 1/2-20 RH Grade 5 plated lock nuts (for use with rod end bolts)
Accessories: Steinjager also manufactures complete tubular suspension links from DOM and/or chrome moly tubing. Contact us about your special application or private labeling opportunity.
Welding: For the best safety results, make sure any welding is done by a certified welder, and that the mating components are of the same or comparable material.
