Universal Rod End Kits Builders Kit 1-14 RH and LH Chrome Moly Housing, Nylon Race Fits 1.750 x 0.250 Tubing 24 Rod Ends
Kit Includes...
Spherical Rod End Bearings, Right Hand: (12) twelve 1"-14 RH x 1.0" bore MXM-16-F chrome moly male spherical rod ends. 4130 Heat Treated Chrome Moly Housing, chrome plated, slotted nylon race.
Spherical Rod End Bearings, Left Hand: (12) twelve 1"-14 LH x 1.0" bore MXML-16-F chrome moly male spherical rod ends. 4130 Heat Treated Chrome Moly Housing, chrome plated, slotted nylon race.
Thread Bungs, Right Hand: (12) twelve RH chrome moly bungs to fit 1.750" OD x 0.250" W Tubing.
Thread Bungs, Left Hand: (12) twelve LH chrome moly bungs to fit 1.750" OD x 0.250" W Tubing.
High Misalignment Inserts: (48) HMBZC-16-12 zinc plated steel inserts. 1.00" bore size. Each insert adds 0.809" to width of assembly, or 1.618" overall (two per rod end).
Spacers/Washers: (48) MCW-16 zinc plated steel spacers. 1.0" bore. 0.375" thick.
Rubber Seals: (48) neoprene face seals bonded to a stainless steel washer. Use two per spherical rod end bearing.
Rubber Boots: There are no rubber boots in this kit.
Nuts & Bolts...
(12) 1"-14 RH Grade 2 plated jam nuts (for rod end stem)
(12) 1"-14 LH Grade 2 plated jam nuts (for rod end stem)
(24) 3/4-16 RH x 4.50" Grade 5 plated bolts (for use with misalignment inserts)
(24) 3/4-16 RH Grade 5 plated lock nuts (for use with misalignment insert bolts)
(24) 1"-14 RH x 4.00" Grade 5 plated bolts (for use with rod ends without inserts)
(24) 1"-14 RH Grade 5 plated lock nuts (for use with rod end bolts)
Accessories: Steinjager also manufactures complete tubular suspension links from DOM and/or chrome moly tubing. Contact us about your special application or private labeling opportunity.
Welding: For the best safety results, make sure any welding is done by a certified welder, and that the mating components are of the same or comparable material.
