Universal Rod End Misalignment Inserts For 10mm Rod Ends Straight Style Yields 8mm Bore Stainless 10 Pack
Quantity Per Package: This package includes 10 bushings (enough for five spherical rod ends). This item does not include the spherical rod end.
Product Name: High Misalignment Insert Bushing
Fits Rod End Bore Size of: 10mm
Bore Size of Insert: 8mm
Material: Stainless Steel
Length of Bushing After Installation: Each bushing adds 9.32mm of width to the rod end, or 18.64mm overall (because two bushings are required per rod end).
Diameter of Flare: 14.40mm
Common Other Names for this Product: heim joint bushings, tapered rod end spacers, rod end inserts.
Application: High Misalignment Bushings are used to increase the misalignment angle of a spherical rod end bearing. Two High Misalignment Bushings are required for each spherical rod end bearing. The high misalignment inserts are a simple slip fit. These bushings provide for more clearance so the bolt head does not minimize the natural cone angle of the spherical rod end bearing.
Typical Mating Part: These bushings are commonly used in conjunction with our DXTM-10 chrome moly spherical rod end bearing, and our DSTM-10 stainless steel teflon race spherical rod end bearing. They can also be used with some spherical plain bearings, and most 10mm bore i.d. spherical rod ends - male or female.
Inch Alternative: The inch equivalent to this series is our HMBSS series.
Write a review