• Rod End Kits Builders Kit

Rod End Kits Builders Kit

855 Piece Suspension Hardware Kit, 1/2" x 1/2" for 0.875" OD x 0.065" W Tubing. Includes 1/2-20 LH/RH Chrome Moly Rod Ends, Bungs, Fasteners, Inserts, Spacers and Boots. Do-it-yourself four (4) link suspenion kit, wishbone kit, custom suspension... this kit defines value kits.


California Residents: WARNING

Part #:

J0015180


Your Price:

$1,564.99


Approximate Weight (lbs): 45.42

Qty: 



In Stock


Free shipping on orders over $50
To the Lower 48 States


    Available Options:



Universal Rod End Kits Builders Kit 1/2-20 RH and LH Chrome Moly Housing, Nylon Race Fits 0.875 x 0.065 Tubing 60 Rod Ends

Kit Includes...

Spherical Rod End Bearings, Right Hand: (30) thirty 1/2-20 RH x 1/2" bore MXM-8 chrome moly male spherical rod ends. 4130 Heat Treated Chrome Moly Housing, chrome plated, slotted nylon race.

Spherical Rod End Bearings, Left Hand: (30) thirty 1/2-20 LH x 1/2" bore MXML-8 chrome moly male spherical rod ends. 4130 Heat Treated Chrome Moly Housing, chrome plated, slotted nylon race.

Thread Bungs, Right Hand: (30) thirty RH chrome moly bungs to fit 0.875" OD x 0.065" W Tubing.

Thread Bungs, Left Hand: (30) thirty LH chrome moly bungs to fit 0.875" OD x 0.065" W Tubing.

High Misalignment Inserts: (120) HMBZC-8-6 zinc plated steel inserts. 3/8" bore size. Each insert adds 0.438" to width of assembly, or 0.876" overall (two per rod end).

Spacers/Washers: (120) MCW-8 zinc plated steel spacers. 1/2" bore. 0.228" thick.

Rubber Seals: (120) neoprene face seals bonded to a stainless steel washer. Use two per spherical rod end bearing.

Rubber Boots: (60) neoprene boots for spherical rod ends fitted with high misalignment inserts.

Nuts & Bolts...
(30) 1/2-20 RH Grade 2 plated jam nuts (for rod end stem)
(30) 1/2-20 LH Grade 2 plated jam nuts (for rod end stem)
(60) 3/8-24 RH x 2.75" Grade 8 plated bolts (for use with misalignment inserts)
(60) 3/8-24 RH Grade 5 plated lock nuts (for use with misalignment insert bolts)
(60) 1/2-20 RH x 2.50" Grade 8 plated bolts (for use with rod ends without inserts)
(60) 1/2-20 RH Grade 5 plated lock nuts (for use with rod end bolts)

Accessories: Steinjager also manufactures complete tubular suspension links from DOM and/or chrome moly tubing. Contact us about your special application or private labeling opportunity.

Welding: For the best safety results, make sure any welding is done by a certified welder, and that the mating components are of the same or comparable material.

Write a review

Your Name


Your Email


Your Review Note: HTML is not translated!

Rating Bad            Good

Captcha
Steinjager

Continue